Description
Billi Filter Cartridges
The Billi Quadra and Quadra Plus feature the Billi dual stage swing-change filtration system. Quadra models 420 and upwards incorporate two filter cartridges, a sediment removal pre-filter and high quality carbon block chemical removal post-filter. The Quadra Compact is fitted with single dual stage filter incorporating sediment and chemical removal elements. All Quadra filters are manufactured using bacteria and biofilm resistant materials for improved water quality. Standard filters will remove sediment particles greater than 5 microns, as well as chemicals, tastes and odours present in the water supply. Premium filters provide better tasting water due to the high quality, carbon chemical removal filter. Rated to remove sediment particles greater than 1 micron, these filters have excellent chemical absorption, removing or reducing chlorine, volatile organic compounds (VOCs), chemicals, tastes and odours. Special purpose filters designed for cyst reduction and heavy metal removal are available. Contact Billi Pty Ltd.
Use only genuine filters as designed for this system. All drinking water filtration systems should be flushed after a period of non-use. Your Billi Quadra has an automatic flushing cycle which can be activated. After a period of non-use of more than two days, e.g. off Saturday and Sunday, the cold water will flow for 90 seconds when the time switch first turns the unit on. Alternatively, before use, lift the cold lever and run until water flow stops, then release the lever.
Filter Change Due Monitor
The Quadra filter change due monitor operates by counting the number of cups dispensed and the number of days elapsed until a pre-set level is reached. Once reached, the dispenser icons will briefly change to orange once every five seconds. The Quadra will continue to operate while the filter indicator is flashing. Water filters installed in areas with higher levels of turbidity (cloudiness/sediment) will experience a reduced service life. The flow from the cold water outlet will decrease as the filters become blocked. It may be necessary to change filters before the change filter indicator flashes. The filter monitor can be reprogrammed to an appropriate service interval if required. Contact Billi Pty Ltd. Standard 5 micron-rated filters generally have a longer service life than Premium sub micron-rated filters. If particularly dirty water is noticed coming through the water supply, e.g. from other tap ware, as sometimes occurs following repairs to local water mains, immediately turn your Billi Quadra off using the ON/OFF button. This will help prevent premature blocking of the filter cartridges.
Replacement of Billi Filter Cartridge
Periodic replacement of your Billi Quadra’s Water Filter Cartridges is necessary to maintain the sparkling cleanliness and purity of your drinking water. A replacement filter change service is available. To arrange, contact The Watershop on 02 9458 1111. If you wish to install the replacement filter cartridges yourself, filters can be purchased online through The Water Shop, which will provide you with genuine Billi replacement filter cartridge sets.
Once new filter(s) have been installed and the filter flush cycle is complete, check for any water leakage around the filter system. Take particular care to ensure the area around the water leakage sensor, located on the lower left hand side of the bulkhead behind the filters, is dry. If you have any questions, or concerns during the filter change process simply contact The Water Shop’s experienced technical assistance team on 02 9458 1111.
